Sourcing bulk sublimated hockey jerseys for a league, a team store, or a regional distribution account usually turns into a freight and color-matching headache. One vendor has the home set, another has the away, and a third ships practice shells in a slightly different shade of navy. Jerseys Wholesale Hub was built to kill that problem with one bonded warehouse, one price ladder, and one QC standard across every NHL-style cut we carry.
Hockey buyers ask the same question first: sublimated or stitched? Both belong in your catalog, and they serve different customers. Sublimated shells hold full-bleed graphics, gradient fades, and sponsor-heavy layouts that embroidery simply cannot reproduce. Stitched builds win on texture, weight, and the resale value collectors pay for. Carrying both lets the price point sort the buyer instead of you turning business away.
Our sublimation runs as true dye-sub at 200°C and above on 100% breathable polyester mesh. Ink bonds into the fiber rather than sitting on top of it, which is why the numbers do not crack, peel, or feel like vinyl across the chest. Wash-fastness holds at a 4-5 rating after 30 domestic cycles, so a jersey that ships in September still looks correct in March.
We stock two primary weights. The 300 GSM heavyweight mesh serves pro-style and premium retail tiers, while a 180-200 GSM fan weight keeps your entry price competitive. Both run through the same dye-lot control, so an order of 60 fan jerseys and 24 heavyweights in the same team navy will actually match under arena lighting.
On the stitched side, every number is built as a double-stitched Tackle Twill layer with a Z-stitch reinforcement at each corner. That corner zigzag is the real difference between a jersey that survives a full season of beer league and one that lifts after ten washes. Collars get reinforced collar bands, and every embroidered crest sits on a soft interior backing so players are not scratched through a base layer.
Because everything sits under one roof, you can pull bulk sublimated hockey jerseys, stitched authentics, and practice mesh against a single purchase order and a single freight bill. That alone typically removes 12-18% of landed cost for buyers who were previously juggling three vendors. Consolidated pallets also mean one customs entry instead of three, which matters a lot when your margin is already thin.
Size runs matter more in hockey than in any other jersey category. Adult cut runs S through 4XL, youth runs YS through YXL, and goalie cuts need extra width through the body with a shorter sleeve so the cuff clears the blocker. Order goalie cuts at roughly 8-10% of any team set, and always confirm the length measurement rather than trusting a generic size chart.
Sleeve length is the second most common return driver. A standard adult sleeve lands at 24-25 inches from the shoulder seam. If your league skews toward taller players, ask for the +1 inch pattern in the pre-order notes; it costs nothing extra at the 50-piece tier and prevents exchanges later.
Stock depth is what separates a real hub from a dropshipper. We hold live inventory across all 32 NHL team colorways, plus a blank mesh program for leagues that supply their own crests. When a playoff run spikes demand in one city, you are not waiting on a factory queue — you are pulling from a shelf that already has 4XL in the home white.
Pricing follows a straight ladder with no hidden setup fees:
- Tier 1 — 25 to 49 pcs: entry wholesale rate, sized for a single team order.
- Tier 2 — 50 to 149 pcs: roughly 8-12% below Tier 1, the sweet spot for league managers.
- Tier 3 — 150 to 499 pcs: roughly 15-20% below Tier 1 for team stores and small distributors.
- Tier 4 — 500+ pcs: container-level pricing with reserved production slots and priority dispatch.
Minimum order quantities start at 25 pieces per design for stock colorways and 50 pieces for full custom sublimation. Mixed-size packs count toward the same tier, so you are never forced to buy 50 mediums to hit a price break.
Quality control is where most wholesale buyers get burned, so here is the exact standard every lot passes before it leaves the building:
- 4-point fabric inspection on every roll before cutting begins.
- AQL 2.5 sampling on stitch density, collar alignment, and number placement.
- Pull test on each Tackle Twill layer, 15 lb minimum, before any rework decision.
- Spectrophotometer color check against the approved lab dip under D65 lighting.
Ask your current supplier for those four data points. If they cannot produce them, the "cheap" price is going to cost you in chargebacks and reships.
Customization turnaround runs 7-12 business days after artwork approval, with stock colorways dispatching in 3-5 days. Rush slots exist for playoff and tournament season, but book them early — February through April fills up fast in every hockey category.
Artwork requirements are simple, and getting them right the first time saves a week. Send vector files in AI, EPS, or PDF. PNG and JPG are accepted for reference only, never for production. Roster data goes in as CSV or XLSX with columns for name, number, size, and any sleeve patch assignment. We return a digital mockup within 24 hours, and one revision round is included at no charge.
Nameplate lettering is available in 2-inch or 3-inch block and script, heat-pressed and then edge-stitched so it cannot lift. If you are building a throwback program, we can match period-correct fonts from a photo — that is a service most importers cannot handle.
Shipping breaks into three lanes. Small parcels under 50 pieces move by express air, typically 5-8 days door to door. Mid-volume orders of 50-300 pieces move by air freight with consolidated customs clearance. Larger programs ship by sea on a 25-35 day schedule, and we will stage inventory in the hub so you can pull partial releases instead of taking everything at once.
Keep your retail margin intact by understanding where the money leaks. The three biggest drains are oversized size runs that leave you with dead 3XL inventory, single-colorway orders that miss the tier break, and reorders placed too late for the production window. Fix all three by ordering 60% of your volume in the four middle sizes and placing a second order the moment your first week of sell-through data lands.
Care instructions belong on every insert you ship. Pass these to your end customers and your return rate drops immediately:
- Wash cold, inside out, on a gentle cycle with like colors.
- Skip the dryer entirely — heat is what kills sublimated color and shrinks mesh.
- Hang dry in shade. Direct sun fades reds and oranges first.
- Never iron a printed number face-on. If you must press out a wrinkle, use low heat and press the reverse side with a cloth barrier.
For league managers running multiple divisions, the practical move is a master roster with colorway assignments locked before the season starts. That gives you one production run, one color standard, and one shipment — instead of six panic reorders in week three.
Frequently asked questions from wholesale buyers:
What is the minimum order for bulk sublimated hockey jerseys?
25 pieces per design for stock colorways, 50 pieces for full custom sublimation. Mixed sizes count toward the same tier.
How long does production and dispatch take?
Stock colorways dispatch in 3-5 business days. Custom sublimation runs 7-12 business days after artwork approval, plus transit time for your chosen lane.
Can I mix sublimated and stitched jerseys in one order?
Yes. Both come out of the same hub, so they consolidate onto one invoice and one shipment with combined tier pricing.
Do you ship to third-party warehouses or fulfillment centers?
We ship to 3PL facilities, FBA prep centers, and team addresses. Provide the labeling spec with your PO and we will prep accordingly.
Stop splitting purchase orders across three suppliers and eating three sets of freight. Head to Jerseys Wholesale Hub to see live NHL stock depth, tier pricing, and current dispatch windows, then lock your size run before the next playoff surge clears the shelves. Low MOQ, one QC standard, and fast consolidated shipping — that is the whole pitch.
